The parts of office chair have two swingarms under the seat, in which the right hand is used to adjust the lower seat height and the left hand is used to adjust the backrest of the seat.
When sitting in parts of office chair, the right hand is used to adjust the height of the chair. To adjust the height of the chair, first you can not sit on the chair, then use the hand to go up the bowl, when the chair reaches the appropriate height, then release the hand pull the arm out. If the chair is too high and you want to lower it down? Sit on the chair, pull the hand up, when reaching the appropriate height, then release the hand pull out.
12 Photos Gallery of: Structure and Use of Parts of Office Chair
Adjust the Backrest of the Parts of Office Chair
This function is only available in some high-grade chairs such as swivel chairs, swivel chairs, leather swivel chairs. This is the function of the lever left hand. The lever has two positions, flush to the tip of the pad or to the tail.
If you are in the workplace: You put your hand to the tip of the cushion, now the seat with a cushioned 870, while the back rest is still elastic, if you want to brake at this angle. Put your hand on the tail.
Adjust the height of the parts of office chair so that when sitting 2 feet still in contact with the floor, sit in balance in the chair, the hand to be at the top of the cushion, 2 hands should be on. arm chair. When leaning back on the seat, slowly recline to the proper angle of the seat. And if you want to break leaning at that angle I brushed my hand to the position of the tail. When you want to reposition the chair back to work, you swipe your arm toward the cushion, the back rests slightly down to bounce the “Crack mechanism”, – the seat back to the sitting position job.